• The analysis principle for each gas component in PG-300 is as following.
  The NOx detector uses a cross-modulation Chemiluminescence Detection (CLD) Method. The SO₂, CO and CH₄ detector uses a cross-modulation Non-Dispersive Infrared Absorption (NDIR) Method. CO₂ detector uses Non-Dispersive Infrared Absorption (NDIR) Method. The O₂ detector can be selected from 3 different types: Galvanic, Zirconia or Paramagnetic Methods. In terms of high accuracy and high degree of selectivity in analysis, the PG-300 is comparable with large-scale continuous gas analyzers and specialized units. 
• Cross-modulation mechanism involves alternating the introduction of sample gas and reference gas into the same gas cell by switching a solenoid valve at regular time intervals. Since clean reference gas (air) is fed into the sample cell in between each sample gas measurement, the gas cell remains clean, which significantly reduces the span drift, and contributes into long-time stability. One more advantage of cross-modulation to the chopper method lies in its smaller zero drift and elimination of the need for optical adjustment.
• Models equipped with methane (CH₄) measurement capabilities, are well-suited for a wide range of applications, including biomass combustion, fuel cell,  greenhouse gas (GHG) research and development, as well as GHG emission monitoring.
• Easy operation ensured by user-friendly color LCD touch screen. The analyzer equipped with several useful functions, including screen capture, a color trend graph, and an inbuild operation guide.  
• Warm-up time is reduced by half camparing with previous model, allowing it to be ready for measurements in just 30 minutes. Additionally, incorporated timer function enables the equipment to aically start warming up at a specified time set by the user. The combination of these advanced features not only saves time in terms of readiness but also facilitates efficient measurements. 
• The NOx  converter’s 95% efficiency ensures high precision of measurements. 
• Energy efficient design with up to 35% reduction in power consumption compared to our previous model. 
• The front panel of the analyzer is featured with SD™ memory card slot, allowing for quick and convenient data storage. Additionally, an Ethernet interface is provided, enabling seamless connectivity to a local network environment. This facilitates real-time data communication. 
• Multi languages and Global certificates 
  <Languages>  English, Chinese, Korean, German, French, Russian, and Japanese
  <Certificates>  TÜV(EU), China, Korea, Japan, MCERTS(UK), GOST(Russia)
• Upgrade to IP42 version (Optionally available)
  A special rear cover is attached to prevent intrusion of water droplets and solid matter inside the analyzer. The cover offers protection against light rain and facilitates application at field.   
  IP=Ingress protection
  IP42 means protection against solid objects of 1 mm diameter and greater, and vertically falling water drops when enclosure is titled up to 15 degrees. Wiping off water drops on the measuring spots are necessary in order to obtain accurate value.
• The PG-300 can be utilized as a backup unit or for cross-checking purposes of the Stack Gas Analyzer ENDA series and other non-HORIBA gas analyzers. It can be conveniently deployed to different locations, use branched sampling line and perform continuous measurement up to 5 days* as back up unit.

  *The duration of continuous measurement may vary depending on the sample gas conditions and application.  

• 

Software

The PG-350 software allows your PG to be connected on any network. The software runs in the Windows environment (Vista, XP, 7 and above) and provides a simple interface to acquire data and record CSV files.

Additionally you can control the NO and NO_X line selection valve to switch aically during your acquisition.

All component values are shown as well as a large graphic display.

You can select your mode in the solenoid menu:

– Manual NO_X
– Manual NO
– Auto NO/NO_X

The graph time range can be selected from 3 to 480 min.

You can install the software and license file on unlimited computers.
Contact your local sales office to get a license file (based on PG MAC address)
To use multiple PG-300 units, use multiple installations of the software in different folders.
Run simultaneously two or more instances of PG software from the different folders, connect and record data from as many PG-300’s as are connected on the network.